Thursday, December 22, 2011

Martha Wrap!

I love parchment paper!  I especially love using it to line disposal aluminum pans with it (I'm not a fan of aluminum touching mine or anyone else's food).  And the geniuses at Martha Stewart have come up with this:

It's Martha Wrap!  It's parchment paper lined aluminum foil!  And it folds and shapes so well, way easier than parchment alone.  Just look!



You can get it for around $4.99 at Safeway.  It comes on a roll (obviously) of 40 sq ft.  I should mention that it has a tendency to roll up if you don't fold the edges over well enough.  So if you're lining a cookie sheet, tear off a little extra so it hangs over enough to fold and crimp.  Otherwise it will mess with your cookies!  And that's not awesome.  

I've also seen Reynolds Wrap version that they call Pan Lining Paper, but I don't think they use unbleached parchment like Martha's looks like.  Although I'm not sure if Martha's is unbleached...but it's a brownish color so I'm just guessing.  Either way, awesome stuff and I love it! 

Thursday, November 10, 2011

Sock Sack

One of my very least fav chores is searching through a pile of laundry, matching up, turning right side out and folding together socks.  Especially dozens of baby socks.  So one day I thought of a simple assistant to this problemo: hang a mesh laundry bag (aka lingerie bag) on the hamper and put all of the baby socks in there as they get dirty.  Then I zipped up the bag, threw it in the wash and they all came out clean and grouped together.  No more rogue socks stuck in the washing machine or getting lost in the dryer!  In 2 years I have not lost one sock in the wash!  Now we have lost several on walks or in the grocery store or in the car, but that's pretty much unavoidable since sock-pulling seems to be every baby's favorite pass time.

To make the sock sack just a bit cuter than a plain mesh bag I took about a 3" long piece of ribbon (make yours whatever length it needs to be to hang off your hamper) and folded it in half.

Then I handstitched it onto a medium sized lingerie bag

and slipped it on one of the front pegs of the kids' hamper.

Fill with dirty socks and done!

Tuesday, October 25, 2011

I Gave a Mouse a Cookie

I made another costume for the BurdaStyle Bernina Halloween Contest.  The idea came to me while reading If You Give a Mouse Cookie to W before bedtime and after I'd finished the others, but I couldn't wait until next year to make it.  And honestly there's a slim-to-none chance I'd remember!  So here's E's final costume choice:
If you're a member of BurdaStyle, I would love and very much appreciate your vote.  If you saw my previous post the prizes are AHHHHHHHHHMAZING!!  Here's the link to the contest:
http://www.burdastyle.com/gallery/275?page=249

Happy Fall!!

Saturday, October 15, 2011

BERNINA Halloween 2011 Contest

BurdaStyle is having a Halloween Contest sponsored by Bernina and one of the prizes is this little beauty I've been drooling over (and saving up for)!
So of course I made the kiddos costumes with a coordinating theme.  I first came up with my son's Colorin' Cowboy after I had quite a bit of faux leather leftover from the upholstered headboard the Hubs and I made a few months ago.  E's costume idea came after that because every Western has a saloon girl and she's just so darn cute in well anything.

I'll post more details and instructions on their costumes later, namely tips on how to sew with satin (I found these after I struggled to put her costume together, twice!).  But for now, head on over to BurdaStyle and check them out.  If you're a member, please vote and/or comment.  If you're not a member, it's free to join and there's ton of creative people on there with endless inspiration and tutorials!

W's costume entry: BERNINA Halloween 2011 Colorin' Cowboy – Sewing Projects | BurdaStyle.com




E's costume entry: BERNINA Halloween 2011 Sassy Saloon Baby – Sewing Projects | BurdaStyle.com














If I actually take E out trick or treating around with her brother she'll probably go as a Triple Grande Nonfat Latte with a long sleeve onesie underneath.  Saloon Baby outfit is cute, but not toasty enough for the Northwest!


E's 2nd option is also entered in the contest: BERNINA Halloween 2011 Triple Grande Nonfat Latte – Sewing Projects | BurdaStyle.com


Tuesday, September 27, 2011

Tiled Kitchen Backsplash!!!

We bought these tiles from our local used building materials store (for only about $1 per square foot!!!) over a year ago and finally tiled our kitchen backsplash the other weekend.  I am so proud of our work and super stoked we get to check off one more project off our list.  Not to mention our outlets will finally be in the walls with covers and we won't get shocked in the middle of the night reaching for the light switch!

Here's my list of things to have:
  • tiles (I've read somewhere to get 10% more than you think you'll need to make up for bad tiles or you might break one while cutting, etc. )
  • thinset aka mastic
  • grout (sanded for joints 1/8" and bigger, non-sanded for smaller joints and glass tile)
  • grout sealer
  • caulk to match the color and sand-situation of your grout
  • latex gloves (all of this cement based stuff dries your hands out like crazy and gloves make taking care of kids and babies much easier when you can just whip off the gloves instead of scrubbing and scrubbing your hands clean)
  • trowel (check with your tile store/thinset for the right size of v-notch)
  • rubber floater (we used the economy/cheapie one and it worked fine)
  • putty knife
  • lots and lots of spacers (they're cheap so buy the big bag)
  • butcher block paper to cover your countertops
  • painters tape
  • self-adhesive drywall tape
  • plastic grocery bag or piece of plastic wrap to put over the thinset in the bucket to keep it from drying out
  • take-out (you have to unplug and pull out your oven to tile behind it so have pizza delivered!)
  • Your fav bev!
Before we started we watched an incredibly informative video on YouTube from the DIY Network's Amy Matthews.  If you're planning on doing any tiling, anywhere in your house, I highly recommend watching this video.  She goes into a lot more detail then I do here and she's a licensed contractor!

Tape up any joints (were 2 pieces meet together) on the drywall or if your drywall doesn't meet up with the cabinets perfectly like ours.  Don't worry about where your wall meets the counters, that's filled in with caulk.

Planning is key and taking the time to be precise before starting will save you lots of time and mistakes.  Once we watched the tutorial a few times, we determined the focal wall of the kitchen and measured and marked the center.  In our kitchen that was the wall with the window and sink that you first see when walking into the kitchen from the dining room.  Next we had to determine the level line for the top of the first row of tiles.  Unfortunately our countertops and cabinets are not evenly spaced all across so we had to adjust for that.  In Amy's video she says to determine the highest point of the countertop and use caulk to fill in for lower places.  Our height difference was as much as 1/2" at some spots which was just too much to make up for with caulk.  So we decided to lower the top level line about 1/4" then trim a little bit off of the bottom of the first row of tiles in the areas that were higher.  This sort of "split the difference" all around so we didn't have an 1/8" bead of caulk in one area and 1/2" in another, but closer to 1/8" to maybe "1/4".  My dad lent us his wet tile saw so all this cutting was easy peasy (especially since the Hubs did it all).  Below is an example of a trimmed down tile (left) and a standard one (right).  You can't really tell unless you get up close or I point it out, which I will probably do :).


So after all of the measuring you want to get a layout of how you're going to place your tiles.  I'm not kidding when I say a lot of planning is necessary for "easy" tiling!  You want to make sure you don't end up with a sliver of a tile at the outside end of the row and it's best to keep cuts in the corners and on the top row which is right up against the cabinets.  We could have spent a little more time on this, but I was getting antsy and wanted to be productive already.  Thankfully we only had a few issues/small tile slivers that came up because of this (see the photo below).  Again, wet tile saw made the cuts easy!  If you don't have one or know someone who does, you can rent them by the day.


As you can see, tiling is messy business.  Or maybe I'm just messy...either way slap down some butcher block paper to protect your counters and wear your workin' clothes!



The main tiles were fun and fairly easy to put up.  These tiles were actually "rejects" from a local tile maker so they had some flaws to them.  Some of the flaws were interesting and kind of pretty, others were not.  We kept the not-so-pretty ones for cutting tiles or put them in the corners.  The tile in the center of the photo below was one of my favorite pretty imperfections, it has a sort of mottled effect:


TIP: when placing your tiles on the thinset smeared surface, don't put them exactly where you want them.  Put them in the approx spot and then slide/jimmy them to the exact right spot and then place the spacers.  By moving the tile slightly, it helps schmear the thinset over the entire back which increases adhesion.

Our accent tiles were about 1/4" thinner than the main tiles.  At first we made up for the diff by backbuttering, but that was too much trial and error with a lot of error.  So being the uber handy/genius the Hubs is, he made me a little backbutterin trough!  We took the difference between the two tiles and that gave us a rough idea of the depth needed for the trough.  Of course there were some slight adjusting necessary with a chisel, but overall so much faster than to butter each strip of tiles by hand!  Even with the trough, these little boogers took FOR-EVVVV-VERRRR to put up!  Next tile job, no tiny accent tiles!  Unless they're in big blocks on mesh backing, then maybe...but probably not.






The accent tiles also took a squillion spacers!  Another reason for getting the big bag.


After you're done tiling, you let it set up for about 24 hours (the instructions on your thinset will tell you the exact time) and then comes the grout!  A batch of grout is only good for about 20 minutes so move quickly, don't mix too much and try to minimize any distractions, i.e., don't answer the phone and wait until the kiddos are down for a nap!  Since I didn't minimize my distractions, I didn't take any pictures of that process.  After you grout, you need to seal the grout.  We used a squeeze bottle with a brush on the tip and looking back we should have just used the spray on kind.  I had to brush EVERY single joint TWICE with the sealer.  The spray stuff would have been so much easier!  Spray and wipe, how hard is that!!

So after the grouting and sealing, comes more waiting and then caulking!  This is also messy and time consuming.  Although I would bet if the space between the counters and the tiles were more consistent it would have been cleaner and faster.  Our job took two tubes of caulk.  You caulk where the counter meets the tile, the corners where the walls meet up and where the tiles meet up to the cabinets.


My dishrack likes to be productive, so I try to always have dishes hanging out in it.  It's just fulfilling its purpose, right?




Overall, we're so pleased with the outcome.  Next tile job will be the bathroom!

Tuesday, August 16, 2011

Tree Stump Floor Cushion

I've been thinking about changing the kids' room from a mountain bike theme to a more woodsy/mountain theme that will work for both my son and daughter since they'll be sharing this room.  I somehow stumbled on this tutorial from Living with Punks on how to make floor cushions and then found a tree stump floor cushion on Etsy that was adorable!  But of course no longer available.  So what does any crafty mom do?  Make her own of course!  Here's what I did to modify Susan's fantastic tutorial into a tree stump floor cushion:

  • 1/2 yard of Joel Dewberry's Aviary 2 Woodgrain
  • 1/2 yard of home dec weight in a light tan
  • dark brown permanent marker
  • green felt for the leaves, so just a bit will do
  • one bag of foam scraps from JoAnn's
  • some quilting batting, probably about 1/2 yard will do
I made mine slightly bigger than Susan did, I cut out my circles in an 18 inch diameter.  To figure out the length of the sides for my enlarged cushion I had to Google the formula to find the circumference of a circle using the diameter.  It's circumference x Pi, BTW.  So my 18 inch diameter circles had a circumference of 56.5 inches.  And since the woodgrain fabric was not home dec fabric, it was only 44" inches wide, I had to cut out two 28 1/4" long pieces and then sew them together along the short ends.


Then I used a disappearing fabric marker to draw some leaves on my felt and cut out three of them:

Next, I used the permanent maker to draw the rings of the wood on both of the circle pieces.  I didn't do such a neat job on the first one so that will be the bottom.  Second one was a bit neater, I took a picture of that one :)

Next came my least favorite part, pinning the circle to the side pieces.  It always seems all wonky at first when attaching a rectangular piece to a circular piece, but stick with it and it turns out fairly well.  I didn't pin the last 2 inches of the side pieces on either end so I could make any adjustments necessary which is a good thing I did because they were a smidge too long!

Before moving on to the bottom piece, I made the twig/stem handle.  To do that I took the handle piece of fabric, folded it right sides facing and sewed along the long edge and one short end with about a 5/8" seam.  

I turned it right side out, stuffed with batting and turned in the open end a bit.

Then I pinned the twig and the leaves to the side of the cushion and sewed it on with a box stitch on both ends of the handle.  I should mention that before I pinned on the leaves, I basted them together because the little boogers were too wiley on their own!

Then I pinned the bottom circle piece on and sewed away using a 1/2" inch seam leaving a gap open on one end.  

Then the surprisingly messy part: stuffing!  I strongly encourage enlisting small hands to help.  My little guy thought it was so much fun to pull the stuffing out of the bag and put into his floor cushion.  I also think this made him very proud and happy with this project.  And he was actually much better at it than I was, small handfuls are key!  Ooh, I forgot to mention (and to do myself) you should put a piece of batting down as the first layer and then stuff with foam.  Then once it's as full as you like, put another piece of batting on the top of the filling.


Once it's good and stuffed, use a ladder stitch to close up the opening, grab a book and enjoy!


Here's a better view of the stump cushion or "my pellow" as my little man calls it.





Sunday, August 7, 2011

Hello and Welcome!

Welcome to Sew Chaotic!  I'm starting this blog to chit chat about random "homey" type stuff I've experienced/used over the years and our newer adventures in making this house a home with two small kidlets running amok.  Mainly I want to share with anyone that is interested the things we have done or products we've used in our house remodel or in my crafting or baking and why I loved them or "not-so-much'd" them.

That being said, if nothing else I hope you get a good laugh out of our mistakes and blunders.  There's been a lot of them and I know we have a lot more to come!